Clean Energy

Fuel Cells

• Fuel Cells | Durability Testing of Electrolyte Membranes in Solid Polymer Membrane Fuel Cells
• Fuel Cells | Evaluation of Heat-Resistance of Solid Polymer Membranes (DTG)
• Fuel Cells | Water Melting Process in Solid Polymer Membranes (DSC)
• Hydrogen Energy Analysis Solutions for Quality Control of Hydrogen
• X-Ray CT Observation of Fuel Cell MEA
• Comprehensive Evaluation of Polymer Electrolyte Membrane (PEM) Using Thermal Analysis
• Evaluation of a Catalyst Used in the Production of Fuel Cell Hydrogen with Transportable Gas Analyzer
• Durability Testing of Electrolyte Membranes in Solid Polymer Membrane Fuel Cells
• Strength Testing in a Hydrogen Environment

Quality Control of Hydrogen​

• Hydrogen Energy Analysis Solutions for Quality Control of Hydrogen
• High-sensitivity Analysis of CO, CO2, and CH4 in Hydrogen

Hydrogen Carriers

• TOC Evaluation of Ammonia Solution
• High-Sensitivity Analysis of Ammonia in Water
• Analysis of Hydrogen in Solution
• Analysis of Hydrogen in Gas

Hydrogen Embrittlement

• Strength Testing in a Hydrogen Environment
• Observation of Corroded Copper Pipe with a Microfocus X-ray CT System
• Quantitative Analysis of the Amount of Deposition and Plating Thickness: Multilayer and Irregular Shaped Samples
• Accurate Measurements of Micro-Displacements in a Compression Fatigue Test of a Gasket

Catalytic Analysis

• Evaluation of a Catalyst Used in the Production of Fuel Cell Hydrogen
• Analysis of an Automotive Three-Way Catalyst
• Analysis of an MEA (Membrane/Electrode Assembly) by EPMA
• X-Ray CT Observation of Fuel Cell MEA

Hydrogen Tank

• Observation of Carbon Fiber Reinforced Thermoplastic Resin with an X-ray CT System
• Measurement of Expansion Coefficient Of Polymer Materials Using TMA
• Verification and Validation of Uniaxial Tensile Test Simulation Results of Composites
• DCB Tests of CFRP
• Example of Non-Destructive Inspection Using an Ultrasonic Optical Flaw Detector

• Applications
• Related Information

Clean Energy

• Effective Evaluation of the Thermal Stability of Lithium-Ion Battery Materials (DSC)
• Li-ion Battery | Measurement of Separator Contraction Behavior (TMA)
• Li-ion Battery | Melting Measurements on Separator (DSC)

Cathode

• Thermal Properties (DSC,TMA,TGA)
• Element Mapping Analysis (EPMA)
• State Analysis (EPMA)
• Element and Current Mapping Analysis (EPMA,SPM)
• Compression Test (MCT)
• Elemental Evaluation in Surface and Cross-section
• Analysis of Interfacial Conductivity
• Mechanical Characteristics under Compression Conditions
• Thermogravimetric analysis, Thermal Stability and Moisture Content
• Measurement of Electrodes under Non-Exposed Atmospheric Conditions
• Characterization of Binders

Anode

• Compression Test for Anode Material (MCT)
• Visualization of the Additive Layer (SPM)
• Particle Properties (SALD)
• Compression Evaluation of Graphite
• SPM Observation of Binders in Electrolyte Solution
• SPM Observation of Additive Layer in Electrolyte Solution
• Surface Potential Measurement of the Anode-Electrolyte Interface

Separator

• Thermal Properties (DSC)
• Thermal Properties (TMA)
• Multifaceted Evaluation (x-ray CT,SPM,AG)
• Piercing Test (AG)
• Compression Test of Lithium Ion Battery Materials (MCT)
• Evaluation of Temperature-Dependent Strength Properties
• Thermo-Mechanical Analysis of Separator
• SPM Observation of Pore Structure
• Performance Evaluation of Separators through Multifaceted Analysis

Electrolyte

• Glove Box System (FTIR)
• Deterioration Evaluation (IC)
• Deterioration Evaluation (GCMS)
• Organic Component Analysis (GCMS)
• Quantitative Component Analysis of Electrolyte Solution
• Organic Analysis in an Ar Atmosphere
• Analysis of NMP without Preparations via headspace GC-FID

Battery Cell

• Non-Destructive Observation (X-ray CT)
• Internal Gas Analysis (GCMS)
• Analysis System for Internal Gas (GC)
• XCT investigations of Electrodes
• Gas Analysis from a Battery Cell
• Non-destructive Observation of Cylindrical LIBs

• Case Studies
• Related Information