XSeeker 8000 - Features

Microfocus X-Ray CT System

Add Bookmark

Compact, High-Output System

Smallest, Lightest Bench-Top CT System in Its Class

It is the smallest and lightest bench-top system in its X-ray output class, so it can be installed anywhere.
Since the system size and weight meet the minimum standards for loading into a general passenger elevator in Japan (as per P-6-C *JIS A 4301-1983), there are no difficulties related to delivering the system.

Smallest, Lightest Bench-Top CT System in Its Class

High 160 kV Output Achieves High Penetration Ability

Thanks to its 160 kV X-ray output, the system can observe thick, hard-to-penetrate plastic and metal parts.
Note: The following are reference values.

X-Ray Transmittance Comparison between 100 kV and 160 kV

Transmittance Comparison  

Image when Penetrating 100 mm of Aluminum

Image when Penetrating 100 mm of Aluminum  

Image Quality and Functionality on Par with High-End Models

High-Accuracy Scanning Utilizing a Maximum Input Resolution of 5.6 Million Pixels

The offset scan layout extends the width to approximately twice that of conventional normal scans, resulting in an input resolution equivalent to 5.6 million pixels. The system provides high-accuracy scanning across a wide 100 mm diameter field of view size.

High-Accuracy Scanning Utilizing a Maximum Input Resolution of 5.6 Million Pixels

Equipped with a 50 μm Pixel Pitch Flat Panel Detector

The system is equipped with a flat panel detector with fine picture elements measuring approximately 50 μm per pixel. This is the smallest pixel pitch of any equivalent class instrument, enabling sharp observations down to the level of fine structures.

Equipped as Standard with a High-Functionality All-In-One Viewer

The system is equipped with a high-functionality viewer with multiple functions. In addition to an MPR display, which shows multiple cross-sectional images side by side, this can be combined with a VR display capable of 3D displays, resulting in more intuitive observations.
Measurement can be performed on both MPR images and VR images. Further, the CT data can be converted to mesh data (STL) for output. Data converted to STL can be utilized in a variety of applications, such as loading into 3D CAD or outputting with a 3D printer.

Equipped as Standard with a High-Functionality All-In-One Viewer

Operation Optimized for Inspections

3-Step Scanning

A simple 3-step process enables starting observations. Upon installation, new operators can run the system with minimal training.
Calibration is not required prior to sample placement.

3-Step Scanning

Operation at the Push of a Button

In inspection applications with repeated scanning of samples with the same shape, operation at the push of a button enhances throughput.
The optimal conditions, including the position displayed and the contrast during observations, are recorded together with the scanning conditions. This allows observations to begin immediately after scanning without adjusting the observation position or contrast. All operations from starting the scanning to observing the results can be completed at the push of a button, without any software operations.

Operation at the Push of a Button
Operation at the Push of a Button 

Scanning in as Little as 12 Seconds and High-Speed Reconstruction Calculations

High-speed scanning can take as little as 12 seconds. In addition, the system is equipped with the same reconstruction system as high-end models, so CT data can be displayed a mere 10 seconds after scanning is complete. This is approximately twice as fast as Shimadzu’s other CT models.

Scanning in as Little as 12 Seconds and High-Speed Reconstruction Calculations

Newly Developed Control Software Enables Intuitive Operations

The simple user interface which eliminates complicated steps, enables intuitive operation so that anyone can easily use the system.
There are dedicated windows for scanning and observation, respectively, and the user is free to switch between them.

  • Scanning Window

    Scanning Window

  • Observation Window

    Observation Window

Recommend Scanning Function

Recommend Scanning Function

The system is equipped with an recommend scanning function, which can set all the scanning conditions with a single click. The optimal imaging conditions can be set easily just by selecting one combination of material and image quality.

AI LOGO 

Supporting the Safety and Security of Users

Status Monitor

In addition to displaying the instrument status, including the stage position during normal operation, the monitor provides details of any errors that occur during abnormal operation and the site where the problem occurs, so the operator is notified of the problem immediately.
The status of the system as a whole is always monitored, from warnings that the sliding door is not shut, for example, to alarms indicating overheating of the X-ray generator and communications faults.

  • During Normal Operation

    During Normal Operation

  • During Abnormal Operation

    During Abnormal Operation

Safety Compliant with CE Marking

Safety Compliant with CE Marking
{"title":"Downloads","description":"Download the latest brochure.","source":"product","key":4662,"max":30,"filter_types":["brochures"],"link_title":"View other Downloads","link_url":"","pdf_links":[]}